IKEA Poäng Chair Assembly Success! 🎉

🎉 You've just assembled your very own IKEA Poong chair! With a few simple steps and a little bit of elbow grease, you'll have a comfortable and stylish seat ready to enjoy. Get ready to relax in comfort!

Step 1 of 55

Hey guys, Tang going to show you how to put together the IKEA Poong Chair. So let's get started.

Step 2 of 55

First thing you want to do is here's all the parts, take it out of the box.

Step 3 of 55

There's not too many parts. And what we're going to do is we're going to find this side and we're going to find the slot.

Step 4 of 55

So make sure that the second slot is the Velcro one and that they curve you know kind of up towards you.

Step 5 of 55

So here's the one one piece here. Make sure that the bottom piece is correctly aligned.

Step 6 of 55

So basically with the screw sticking out of the bottom. Then go ahead and put the slats in.

Step 7 of 55

So like I said, the Velcro should be the second one from the top. And it should be curving towards you.

Step 8 of 55

I mean, you know, curving with the curve of the actual chair. Now find the other side and go ahead and line those up and put those in as well.

Step 9 of 55

So once we've got that lined up, then what we're going to do is we're going to screw these in.

Step 10 of 55

So there's eight screws and note that these are the skinny ones.

Step 11 of 55

So there's some thick and skinny ones that look really similar. So make sure it's the skinny ones.

Step 12 of 55

So that's the ones on the left here. So they're really hard to tell, but yeah, the skinny ones are the ones we're going to line up to put these in.

Step 13 of 55

So what I did is I put all eight in. I just started all of them because the instruction state did not use a drill, but I'm going to do it anyways.

Step 14 of 55

I just have it on a really low setting. So it doesn't damage anything. So once you get all eight, you know, started and I just use my drill.

Step 15 of 55

Tighten them up. That way it's just faster. Like go ahead and do that on all eight screws here.

Step 16 of 55

And then what we want to do is we want to attach the bottom piece.

Step 17 of 55

So it's two screws. And now these are the thicker ones. So be careful of that. You want it two thicker ones.

Step 18 of 55

So go ahead and line that up. Get that screw started. And then go to do the other one as well.

Step 19 of 55

If you want to put it down at this point, you can make it might make this screw a little bit easier.

Step 20 of 55

Once you get those started, then what I did is I put it down and then I'll use my drill to tighten those up.

Step 21 of 55

Once we've done that, then go ahead and put these slats in the bottom.

Step 22 of 55

And this is just going to give support to the actual seat. So note that they curve up and these again are the thicker screws.

Step 23 of 55

So I'm going to put the slats in. Get those lined up. And then go ahead and put the four screws in.

Step 24 of 55

So three of them will be easy because there's not tension on the actual seat here.

Step 25 of 55

So go ahead and get three of them started. And then what I did for the fourth one since there was tension.

Step 26 of 55

It was just me is I use my shoulder here to brace the chair pool with my left hand.

Step 27 of 55

And then I started it with my right hand. That way it would line up. Because if you don't, then there's going to be too much tension is not going to line up.

Step 28 of 55

Then go ahead and screw them in tight after you started on.

Step 29 of 55

And then take this screw here and this washer and that peg.

Step 30 of 55

And we're going to line this up and put the legs on. So there's two different screws that look kind of the same too, but this one's a little bit easier because we're just going to use a shorter one on the left and the peg and the washer.

Step 31 of 55

So there is a left and a right leg. So this is the left leg. So note the orientation.

Step 32 of 55

You see the, you know, the holes on the side here. So that top hole is where you want to line up with the peg at the end of the seat.

Step 33 of 55

So put the peg in. Line up that hole and put that in place. And then you can screw in the top piece with the washer.

Step 34 of 55

So put that washer on with the screw in there. Get that started.

Step 35 of 55

And then go ahead and use your drill and tighten it up.

Step 36 of 55

Next what we're going to do is we're going to put these pieces on and these are support pieces.

Step 37 of 55

So note that the holes stick out out and I guess to the back.

Step 38 of 55

So that's going to be important. And these are the longer screws this time, not the shorter ones with that little nut at the bottom.

Step 39 of 55

So hole sticking outward. Go ahead and put those in.

Step 40 of 55

And then go ahead and do the other one as well.

Step 41 of 55

Notice that the holes are sticking back.

Step 42 of 55

And then go ahead and line up your peg again if you mess it up like me.

Step 43 of 55

And then go to put this nut in there.

Step 44 of 55

Make sure that it's, you know, able to be able to screw in with screw in with the screw here.

Step 45 of 55

So you can use a flat head to hold it in place while you start this. And once you start it, you don't need the flat head anymore.

Step 46 of 55

Go ahead and do the same thing on the other side. Start it and then you use your drill to tighten it up.

Step 47 of 55

Once we've done that, now flip the chair to the other side and we're literally going to do the exact same thing.

Step 48 of 55

So take your peg and your shorter screw and the washer and line that all up and put the two support, you know, posts in place.

Step 49 of 55

Line up with the peg there and then screw in that top piece with the washer.

Step 50 of 55

And then put the other side. These are the longer screws with the little nuts at the bottom.

Step 51 of 55

So put those two in. Same thing. Get them started first and then use your drill.

Step 52 of 55

And then you're basically done. Put in put on your cushion. So the velcro on the top on the second slot there.

Step 53 of 55

And that's basically it. And you've put your IKEA Poong chair together.

Step 54 of 55

So if you thought the video was helpful, don't forget to comment, like, share and subscribe.

Step 55 of 55

And thanks for watching.